The Mobile Android B-Ware App
To install the Android B-Ware app on your Android device follow the steps below: 1. Locate your Google Play icon which comes standard with every Androi...
Sun, 23 Dec, 2018 at 12:47 AM
To take a reading of the HM-5 with your Android, do the following: 1. Go to the Monitor List (example below). 2. Place the back of the phone up...
Sun, 30 Dec, 2018 at 6:05 PM
To View Data, do the following: 1. Tap on the monitor on the monito list for which you would like to view data. Try not to tap near the three vertical ...
Sun, 23 Dec, 2018 at 7:45 PM
You can tare (also called "setting zero") the HM-5 using the Android app. Just follow these steps: 1.) Tap the monitor you are using and sele...
Fri, 12 Jun, 2020 at 7:19 PM
There are several settings that are modifiable under Application Settings: 1.) Set the Weight Unit, choose between metric and imperial 2.) Set the Temp...
Mon, 18 Mar, 2019 at 3:07 PM
The iPhone can only read about 11 to 14 days of data when reading 1 hour interval data. If you'd like to increase the number of days of data, the tr...
Sun, 20 Jan, 2019 at 5:51 PM
Logging is the internal B-ware act of recording certain statuses and communication records so that any issues can be analyzed and resolved easier. Normally...
Sun, 24 Mar, 2019 at 5:33 PM
Initially all HM-5 hive monitors are identified by their serial number. It is possible, however, to set a custom name to your hive monitor - one that might...
Wed, 5 Feb, 2020 at 8:45 PM
In some cases, in order to fix an HM-5 that may be acting unusual, it may help to reset the HM-5 back to factory settings. 1.) Start from the HM-5 Mo...
Wed, 2 Sep, 2020 at 7:27 PM