Follow these instructions to configure the GW-1 with your Android.
1.) On your phone app, make sure you are logged into your Solutionbee account. From the Android phone app main menu, select GW.
2.) Plug in your GW-1 into a powered USB port. The GW-1 will appear on the screen. The GW LED will turn from red to blue, meaning that the GW is now in configuration mode.
3.) Tap on the GW to enter the configuration screen. A WiFi scan will bring up a list of nearby routers. Select the router you would like to connect to.
4.) Enter the router password and press the LARGE blue button.
5.) After pressing the LARGE blue button wait about 1 minute and the following message will appear.
6.) Wait another 3 minutes and the GW LED will change from blue to green, indicating that data is now flowing. Check your HM-1 cloud graphs after about 20 minutes to check that new data has been added.